Saturday, January 18, 2014

Point Motor Energiser aka CDU

Assembling a batch of PME (Point Motor Energiser) printed circuit boards for the South African market... The third batch!! (Part number = AND-01)
PME provides a reserve of charge to ensure that a good voltage is available to throw point motors. Especially useful when several motors are thrown by one lever, setting cross-overs for example.

The PME stores up power in capacitors and when a point motor is actuated, discharges in one big punch giving the point motor a firm and positive switching action.
When connected to points via switches or probe and studs.
It will prevent burnt out solenoids of point motors.

Twin 2200µf Capactors. Input: 15v to 20v A.C. or D.C.


The finished product - commissioned and 
ready for the South African market.
Point Motor Energiser board for 
points motors.
Ideal for Hornby, Peco & Seep
Imperative to have one board installed 
per Layout! - to protect your 
valuable point motors!

Each module with instruction sheet inside Ziploc bag.

A batch of Point Motor Energiser boards with Instruction sheets was shipped to Randpark Ridge, Randburg, Johannesburg on Friday February 07, 2014.

No comments:

Post a Comment